Emergency Starting - TOHATSU MFS 4C Owner's Manual

Hide thumbs Also See for MFS 4C:
Table of Contents

Advertisement

Available languages

Available languages

34
ENGINE OPERATION
ENOW00064-0
Engine may be hot immediately after oper-
ating and could cause burns if touched.
Allow engine to cool down before attempt-
ing to carry the outboard.
6. Check the cooling water from cooling
water check port.
1
7
1. Cooling water check port
ENOM00042-A

Emergency starting

ENOW00099-A
When the emergency starter rope is used
for starting engine;
Start in gear protection does not work.
Be sure to shift is at neutral position.
Otherwise the engine will move the boat
immediately and cause personal injury.
Be careful that your clothes or other
items do not get caught in the rotating
engine parts.
To prevent accident and injury by rotat-
ing parts, do not re-attach flywheel
cover and the top cowl after the engine
has been started.
Do not pull starter rope if any bystander
is behind. The action can injure the
bystander.
Attach engine stop switch lanyard to
clothing or any part of body like arm
before starting engine.
CAUTION
ENOF00437-1
WARNING
1. Remove the top cowl.
2. Disconnect the rink of the starter lock
rod.
3. Remove the bolts (3 pcs) and remove
the recoil starter.
4. Insert the knotted end of the starter
rope into the notch in the flywheel and
wind the rope around the flywheel sev-
eral turns clockwise.
1
ENOF01521-0
ENOF00433-0
ENOF00434-0

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfs 5cMfs 6c

Table of Contents