3.
Operation Manual
Program Area
Shown as follows:
Operation Instruction
Indicator
Connect MSP 221 with power, the 7 indicators light one by one, and then all lights are off.
EDID Copy
With the ability of EDID copy, MSP 221 could copy EDID from other devices, More detail
are as follows:
1. Copy HDMI/DVI EDID
(1) Take RMS 8424 as an example, users need to connect MSP 221 DVI output interface
with RMS 8424 DVI input interface by a DVI cable when copying the EDID of RMS
8424 DVI interface (RMS 8424 default EDID is Mstar Demo).
(2) After connection, press HDMI <COPY> and <ENTER> buttons in turn. The device will
ring "beep" sound for three to four times. If the device only makes a loud "beep"
sound, it means the EDID copy comes to fail and needs to be operated again.
(3) Copied EDID will be saved in HDMI <WRITE1>. User can check it through AVMSP
software as well as HDMI EDID copy.
MSP 221
User Manual
24