Adf & Document Cover Assy - Brother MFC5890CN Service Manual

6.1.3 ADF & Document Cover ASSY
(1) Place the scanner cover upside down.
(2) Insert the tip of a flat screwdriver into the slit provided in the harness support and twist it to
release the two latches and then take the harness support out of the scanner cover.
Bundle of harnesses
(Document sensor PCB harness,
ADF motor harness,
and grounding wire)
Guide curve
Assembling Note: Before fitting the harness support (shown above) into the scanner
cover, route the document sensor PCB harnesses and the bundle of ADF motor harness and
its grounding wire through the guide curve provided in the harness support. The CIS motor
harness and the grounding wire should be placed at the rightmost position (viewed from the
bottom) in the square opening in the scanner cover.
Latches
CIS motor harness
Grounding wire
Harness support
Scanner cover
(placed upside down)
6-12
Harness support
Flat screwdriver
Confidential
(6_09)