Low Voltage Power Supply Pcb Assy - Brother FAX-2840 Service Manual

9.28 Low voltage power supply PCB ASSY

(1) Remove the earth spring front chute from the LVPS shield plate cover and the front
chute ASSY.
(2) Remove the hook part of the earth harness under R from the LVPS shield plate cover.
(3) Remove the three taptite bind B M4x12 screws, the screw pan (S/P washer) M3.5x6
screw and the screw pan (S/P washer) M3x12 DB screw to remove the LVPS shield
plate cover.
Main frame R ASSY
Earth spring front chute
Screw pan (S/P washer) M3x12 DB
Taptite bind B M4x12
Assembling Note :
• Hanging the earth spring front chute on the guide of the main frame R ASSY.
Guide
Earth harness under R
Screw pan (S/P washer) M3.5x6
Taptite bind B M4x12
Fig. 3-44
LVPS shield plate cover
3-56
Confidential