Hardware Src Formats - IBM iSeries 270 Service Manual

Sb2 and sb3 hardware

Hide thumbs Also See for iSeries 270:

Table of Contents

Table 3. Decimal Address Values

x1 = System bus

x2 = System board

x3 = System card

x4 = Adapter location

11. Return to the information that sent you to this procedure.

This ends the procedure.

Note: See Hardware SRC formats for more formatting information.

Hardware SRC formats: For use by authorized service providers.

Table 1. SRC format examples

Note: Other formats exist; if necessary contact your next level of support.

Panel function,

digits x to y

(from left to

For further definition of the Logical Address Format, see Logical Address Format in the iSeries Service

The one, two, or three digit decimal representation of the hexadecimal Bus value of

the Bus-Bus-Bus-Bus/Card-Card/Board-Board format Address at the top of Figure

2. Format conversion (See page 574) shown above.

The one or two digit decimal representation of the hexadecimal Board value of the

Bus-Bus-Bus-Bus/Card-Card/Board-Board format Address at the top of Figure 2.

Format conversion (See page 574) shown above.

The one or two digit decimal representation of the hexadecimal Card value of the

Bus-Bus-Bus-Bus/Card-Card/Board-Board format Address at the top of Figure 2.

Format conversion (See page 574) shown above.

The one or two digit decimal representation of the hexadecimal b Adapter value of the

Communications unit address value in step 9 (See page 576).

TTTT LMMM TTTT LMMM tttt lmmm

ssss ssss 0000

Analyze hardware problems

Show Quick Links

Table of Contents