Addresses - Models 800 And 810 - IBM iSeries 270 Service Manual

Addresses — Models 800 and 810
For use by authorized service providers.
Use the address to find the location. Then, go to Locations — Models 800 and 810 for additional
information.
Table 1. IOP, IOA, and device address information for Models 800 and 810
Position (listed in
IOA assignment Possible failing
order) component
MB1 Embedded IOP
MB1 Service
Processor
C07 Comm/Wkst IOA
C01 Storage IOA
C06 IOP
C06 Storage IOA
C06 Comm/Wkst IOA
C05 IOP
C05 Storage IOA
C05 Comm/Wkst IOA
C04 (IXS capable IOP
position)
C04 (IXS capable Storage IOA
position)
C04 (IXS capable Comm/Wkst IOA
position)
C03 IOP
C03 Storage IOA
C03 Comm/Wkst IOA
C03 IXS attached IOA The IOA has the same DSA as the first IOP
C02 Storage IOA
C02 Comm/Wkst IOA
DSA (BBBBCcbb)
Note: IOA and device DSA's will not follow
the rules below if the IOA is manually
reassigned after IPL.
0001-10-00
0001-70-00
0001-10-00
0001-10-00
0001-13-00
0001-10-00
0001-10-00
0001-14-00
The IOA has the same DSA as the first IOP
found in the following list: C06, MB1.
The IOA has the same DSA as the first IOP
found in the following list: C06, MB1.
0001-15-00
The IOA has the same DSA as the first IOP
found in the following list: C05, C06, MB1.
The IOA has the same DSA as the first IOP
found in the following list: C05, C06, MB1.
0001-16-00
The IOA has the same DSA as the first IOP
found in the following list: C04, C05, C06,
MB1.
The IOA has the same DSA as the first IOP
found in the following list: C04, C05, C06,
MB1.
found in the following list: C04, C05, C06,
MB1.
The IOA has the same DSA as the first IOP
found in the following list: C03, C04, C05,
C06, MB1.
The IOA has the same DSA as the first IOP
found in the following list: C03, C04, C05,
C06, MB1.
Unit address
FFFFFFFF
FFFFFFFF
E1FFFFFF
2FFFFFFF
FFFFFFFF
3FFFFFFF
E3FFFFFF
FFFFFFFF
4FFFFFFF
E4FFFFFF
FFFFFFFF
5FFFFFFF
E5FFFFFF
FFFFFFFF
6FFFFFFF
E6FFFFFF
E506FFFF
7FFFFFFF
E7FFFFFF
Analyze hardware problems
325