Locations - Power Distribution Unit (Pdu) - IBM iSeries 270 Service Manual

Position FRU name
Position depends on Integrated xSeries
xSeries Server Adapter
machine type and
model.
To locate, follow the
HSL cable
connections or the
SPCN cable
connections to the
Integrated xSeries
Adapter card.
HSL cables on the HSL cable
HSL ports
Locations — Power Distribution Unit (PDU)
For use by authorized service providers.
Figure 1. Locations for the Power Distribution Unit (PDU)
320
Hardware (Remove and Replace; Part Locations and Listings)
Possible failing Type, CCIN, or Part
component number
The failing component CCIN = 2689 listed
is either: under machine type
1519.
v HSL I/O Bridge
v Multi - adapter
Note: Machine type
Bridge
1519 is not an
v SPCN iSeries
type or an xSeries
v Embed - ded IOP
machine type.
v Card Backplane
Machine type 1519
was created to list
feature 2689
separately from
iSeries and xSeries
machine types.
See the Type, model,
and part number
list for the part
number.
HSL connection See the Type, model,
and part number list.
Remove and replace
procedure
Go to Type 2689 -
Integrated xSeries
Adapter (IXA).
Note: Verify the frame
ID by examining the
(TM)
machine frame ID displayed on
the card's LED which
is visible when the
panel covering the
card is removed.
Note: In an OS/400
Opticonnect
environment it is
possible to have
multiple xSeries
Servers with the
same frame ID
displayed but the
power controlling
system is different
than the system you
are servicing. Verify
the SPCN cable is
connected to the
system you are
servicing.
Go to HSL cables -
concurrent.
(R)