Locations - Fc 5075 Expansion I/O Tower - IBM iSeries 270 Service Manual

Table 2. IOA assignment rules
Multi-adapter bridge domain / PCI bridge set
C01 - C04
C05 - C10 (Not including C08)
C11 - C15
Locations — FC 5075 Expansion I/O Tower
For use by authorized service providers.
The following diagram shows FRU layout in the FC 5075 expansion Expansion I/O Tower. Use it with the
tables below. If you need address information, refer to Addresses — FC 5075 Expansion I/O Tower.
Figure 1. Locations for the FC 5075 Expansion I/O Tower
The following table gives the components available for callout on the FC 5075 Expansion I/O Tower. It
matches those components with the FRU containing the component. The other columns give location
information, CCIN information, a link to a remove and replace procedure, and additional information.
Table 1. FRU locations and failing components for FC 5075 Expansion I/O Towers
Possible failing
component FRU name
IOA PCI card
IOA assignment rules
C01, C02, C03, C04
C05, C06, C07, C09, C10
C11, C12, C13, C14, C15
Type or CCIN
number (see the
Type, model, and
Position part number list)
C01 through C04, See the Type,
C06, C07, C08 model, and part
number list.
Remove and
replace Additional
procedure comments
Go to FC 5075 -
Cards
(concurrent).
Analyze hardware problems
299