IBM iSeries 270 Service Manual page 510

Model 840, SB3 Processor Tower: Use the diagrams and tables below for information on the Power
and signal cables for the Model 840, SB3 Processor Tower. There are four diagrams with corresponding
tables:
v Model 840 and Model SB3 Processor Tower - Single Line Cord Power and Signal Cables (See page
498)
v Model 840 and Model SB3 Processor Tower - Dual Line Cord Power and Signal Cables (See page 500)
v Model 840 and Model SB3 (FC 9079) Base I/O Tower - Single line cord power and signal cables (See
page 502)
v Model 840 and Model SB3 (FC 9079) Base I/O Tower - Dual Line Cord Power and Signal Cables (See
page 504)
Figure 10. Model 840, SB3 Processor Tower - Single Line Cord Power and Signal Cables
498
Hardware (Remove and Replace; Part Locations and Listings)