IBM iSeries 270 Service Manual page 312

Possible failing
component FRU name
IOP PCI card
Integrated PCI card
(TM)
xSeries
Server (IXS)
Tower card
v IOP
(embedded)
v Card enclosure
or backplane
v Tower card
v SPCN
v HSL I/O bridge
v Multi-adapter
bridge (all)
Disk unit Disk unit
Power supply Power supply
Air moving device AMD
Display panel Display panel
Power board Power board
Device board Device board
SPCN card SPCN card
HSL connection HSL cable
300
Hardware (Remove and Replace; Part Locations and Listings)
Type or CCIN
number (see the
Type, model, and
Position part number list)
C02 through C07 2842 (See page
527), 2843 (See
page 527), or
2844 (See page
527)
C02, C05 2890 (See page
527) or 2892 (See
page 527)
CB1 283B (See page
526)
Note: Embedded
IOP (type 284B)
is exchanged with
the 283B tower
card part.
D01 to D06 See the Type,
model, and part
number list.
P01 - P02 See Final
assembly — FC
5075.
B01 - B02 See Final
assembly — FC
5075.
NB1 247E (See page
523)
PB1 See the Type,
model, and part
number list.
DB1 283F (See page
527) or 28CD
(See page 528)
SB1 See the Type,
model, and part
number list.
HSL cables on See the Type,
the HSL ports model, and part
number list.
Remove and
replace Additional
procedure comments
Go to FC 5075 -
Cards
(concurrent).
Go to FC 5075 - If IXS in C02, C03
Cards is empty - if 2890
(concurrent). IXS, only a short
card can be in
C04.
If IXS in C05, C06
is empty - if 2890
IXS, only a short
card can be in
C07.
Go to FC 5075 -
Tower card - CB1.
Go to Recovery
procedures.
Go to FC 5075 -
Power supply -
P01 and P02.
Go to FC 5075 -
AMD - B01, B02.
Go to FC 5075 -
Display panel -
NB1.
Go to FC 5075 -
Power distribution
board - PB1.
Go to FC 5075 -
Device board -
DB1.
Go to FC 5075 -
SPCN card - SB1.
Go to HSL cables
- Concurrent.