Example For Installing A Patch File - Huawei AR2200 Series Configuration Manual

Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration
1. PCB
2. MAB
3. Board
4. CPLD1
5. CPLD2
6. BootROM
----End

9.7.2 Example for Installing a Patch File

This section provides an example for installing a patch without interrupting services.
Networking Requirements
The device performance needs to be optimized without affecting the use of the current version
on the device.
As shown in
provided a patch file for the customer to install.
Figure 9-3 Networking diagram for installing a patch file
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
Data Preparation
To complete the configuration, you need the following data:
l
l
Procedure
Step 1 Upload the patch file mapping the current system software.
# Upload the patch file mapping the current system software to the device from the PC.
ftp> put SPH-1.1.952.pat
200 Port command okay.
226 Transfer complete.
Issue 02 (2011-10-15)
Version : AR01SDSA2A VER.A
Version : 0
Type : 1SA
Version : 0
Version : 0
Version : 906
Figure 9-3, the performance of the device needs to be optimized. Huawei has
GE2/0/0
10.1.1.1/24
MPLS Core
PE
FTP Server
Upload the patch file to the storage medium on the MPU.
Load and run the patch file.
Verify the configuration.
Patch file name, which is SPH-1.1.952.pat in this example
Patch file storage path on the master MPU, which is sd1 in this example
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Upgrade and Maintenance
PC
10.1.1.2/24
199