Displaying System Configuration; Displaying System Status - Huawei AR2200 Series Configuration Manual

Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration
Context
You can use the display commands to collect information about the system status. The display
commands are classified according to the following functions:
l
l
l
See the related sections for display commands for protocols and interfaces. The following part
only shows the system-level display commands.
Run the following commands in any view.

3.2.1 Displaying System Configuration

This section describes how to check the system version, system time, original configuration, and
current configuration by using command lines.
Prerequisite
Basic configuration are complete.
Procedure
l
l
l
l
----End

3.2.2 Displaying System Status

This section describes how to check the system operating status (the configuration of the current
view) by using command lines.
Prerequisite
Basic configurations are complete.
Procedure
l
Issue 02 (2011-10-15)
Displays system configurations.
Displays the running status of the system.
Displays the diagnostic information about a system.
Run the display version command to display the system version.
Run the display clock command to display the system time.
Run the display saved-configuration command to display the original configuration.
Run the display current-configuration command to display the current configuration.
NOTE
l The display version command can be used to display the software version of the system, the
chassis type, and the information about the main control board and interface board.
When a user runs the display current-configuration command to display configuration
information, other users cannot run the same command until all the command output is displayed.
l The original configuration refers to information about configuration files used by the device when
the device has been powered on and is being initialized. The current configuration refers to the
configuration files taking effect during the device operation. For details, see the chapter
"Configuring System Startup" in the AR2200 Basic-Configuration.
Run the display this command to display the configuration of the current view.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Basic Configuration
28