Huawei AR2200 Series Configuration Manual page 194

Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration
Procedure
Step 1 Log in to the router from the console port. For details, see
the Console Port or Mini USB
Step 2 Restart the router. Press Ctrl+B to enter the BootROM menu when the following information
is displayed.
Sep 16 2011,17:14:28
Copying Data : Done
Uncompressing : Done
Initializing SMI Bus:OK
Init flash, please wait......
Base Address: 0xfffffffffc000000
Size is: 0x20000000OK
flash drv init.
Initializing FlashPiece Module:
FlashPiece start offset at: 0x300000
FlashPiece size is: 0x100000
Initializing FlashDynamic Module:
FlashDynamic start offset at: 0x400000
FlashDynamic size is: 0x200000
Initializing I2C Bus:OK
USB2 Host Stack Initialized.
USB Hub Driver Initialized
USBD
EHCI Controller found.
Waiting to attach to USBD...0xbfffdf0 (tRootTask): usb1_base = 0xbff22000Done.
0xbfffdf0 (tRootTask): usbBulkDevInit() returned OK
Press Ctrl+B to break auto startup ... Attached TCP/IP interface to teth1.
Step 3 Select choice 3 to enter the network menu.
Enter Password:
Enter your choice(1-6):3
Step 4 Select choice 2 to modify the parameter.
NetWork Menu
Enter your choice(1-10): 2
Set the FTP type, resource file name, management interface address, FTP server address, and
FTP user name and password.
Issue 02 (2011-10-15)
Wind River Systems, Inc
NOTE
l If a password is configured, you must enter the password after pressing Ctrl+B to display the BootROM
menu (the default password is huawei ).
l You can change the password under the BootROM menu. Make a note of your password and keep it
in a safe place. The password cannot be restored if it is lost.
Main Menu
1. Default Startup
2. Serial Menu
3. Network Menu
4. Startup Select
5. File Manager
6. Reboot
1. Display parameter
2. Modify parameter
3. Save parameter
4. Download file
0. Return
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Port.
9 Upgrade and Maintenance
1.2 Logging In to the Device Through
183