Checking The Configuration; Logging In To The Devices By Using Telnet - Huawei AR2200 Series Configuration Manual

Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration

5.2.4 Checking the Configuration

After a user logs in through a console port, the user can view information on the console user
interface, such as use information, physical attributes and configurations, local user list, and
online users.
Prerequisite
Configurations of user login through a console port are complete.
Procedure
l
l
l
----End
Example
Run the display users command, and you can view information about the current user interface.
<Huawei> display users
User-Intf
0
Username : Unspecified
Run the display user-interface console ui-number1 [ summary ] command, and you can view
the physical attributes and configurations of the user interface.
<Huawei> display user-interface console 0
Idx
0
+
F
Idx
Type : Type and relative index of UIs.
Privi: The privilege of UIs.
ActualPrivi: The actual privilege of user-interface.
Auth : The authentication mode of UIs.
Int
Run the display local-user command, and you can view the local user list.
<Huawei> display local-user
----------------------------------------------------------------------------
User-name
----------------------------------------------------------------------------
admin
ftp
guest
----------------------------------------------------------------------------
Total 3 user(s)

5.3 Logging in to the Devices by Using Telnet

If multiple routers need to be configured and managed, you do not need to connect the routers
and maintain them locally one by one. Instead, you can log in to the routers from a terminal by
Issue 02 (2011-10-15)
Run the display users [ all ] command to check information about the user interface.
Run the display user-interface console ui-number1 [ summary ] command to check
physical attributes and configurations of the user interface.
Run the display local-user command to check the local user list.
Delay Type
CON 0 00:00:44
Type Tx/Rx
CON 0 9600
: Current UI is active.
: Current UI is active and work in async mode.
: Absolute index of UIs.
A: Authenticate use AAA.
N: Current UI need not authentication.
P: Authenticate use current UI's password.
: The physical location of UIs.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Network Address
Modem Privi ActualPrivi Auth
- 3 -
State AuthMask
A H
A F
A A
5 Configuring User Login
AuthenStatus AuthorcmdFlag
pass
Int
N -
AdminLevel
-
-
15
no
60