Information Center Configuration Examples; Example For Outputting Logs To The Log File - Huawei AR3200 Series Configuration Manual

Huawei AR3200 Series Enterprise Routers
Configuration Guide - Device Management
Context
Statistics about the information center cannot be restored after being cleared. So, confirm the
action before you use the command.
Procedure
l
l
l
----End

2.7 Information Center Configuration Examples

This section provides information center configuration examples.

2.7.1 Example for Outputting Logs to the Log File

This section describes how to output logs of a specific module or specific severity level to the
log file. This enables maintenance engineers to monitor the operating status of the device and
locate a fault by checking the output logs.
Networking Requirements
As shown in
server. Maintenance engineers can easily obtain the operating status of Router A and locate any
faults occurring on it.
Figure 2-4 Networking diagram of log output to the log file
RouterA
Issue 03 (2011-11-27)
CAUTION
To clear statistics about the information center, run the reset info-center statistics
command in the user view.
To clear statistics about the log buffer, run the reset logbuffer command in the user view.
To clear statistics about the alarm buffer, run the reset trapbuffer command in the user
view.
Figure 2-4, Router A is required to transport logs to a File Transfer Protocol (FTP)
NOTE
The system selects a storage medium in descending order of priority: sd0, sd1, usb0, and usb1. The default
log storage medium is sd0. If sd0 is unavailable, the default log storage medium is sd1. If none of sd0, sd1,
usb0, and usb1 is unavailable, the log files cannot be saved. The log storage path is in the format of storage
medium name:/logfile, for example, usb0:/logfile.
10.2.1.1/16
GE1/0/0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
IP network
FTP Server
10.1.1.1/16
2 Information Center Configuration
37