Uploading A Gtl License File; Activating The Gtl License File - Huawei AR2200 Series Configuration Manual

Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration
Pre-configuration Tasks
Before activating a GTL license file, complete the following tasks:
l
l
Data Preparation
To activate a GTL license file, you need the following data.
No.
1

9.2.2 Uploading a GTL License File

The GTL license file that has been applied for can be activated only after the file has been
uploaded to the storage medium on a device.
Context
Before uploading a GTL license file, run the dir command to check the remaining space of the
storage media on the device. Make sure that there is enough space in the storage media to store
the GTL license file.
Procedure
Step 1 Run:
dir device-name
Check whether the GTL license file is existed.
The license file is in the .dat format and can be stored in the flash memory, SD card or USB
flash drive.
----End

9.2.3 Activating the GTL License File

After activating the GTL license, you are allowed to operate the corresponding service modules.
Context
Before activating the GTL license, run the dir *.dat command to verify that the license file has
been loaded to the USB flash drive, sd card, or flash memory..
Issue 02 (2011-10-15)
Applying for a GTL license file
Installing the GTL license file
Data
GTL license file name
NOTE
l A user who uses the GTL license for the first time must buy the GTL license from Huawei, and then
load the GTL license file to the main control board.
l A user who wants to upgrade the GTL license needs to run the license revoke command to obtain an
invalidation code, and then apply to Huawei for a new GTL license by using the invalidation code. The
user also needs to load the new GTL license file to the main control board.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Upgrade and Maintenance
178