Configuration Examples; Example For Performing File Operations By Means Of The File System - Huawei AR2200 Series Configuration Manual

Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration
Run the display ssh server session command. The command output shows that the session
information between SSH server and client.
<Huawei> display ssh server session
Session 2:

6.5 Configuration Examples

This section provides an example for performing files by accessing the system and using FTP
or SFTP.These configuration examples explain networking requirements, configuration
roadmap, and configuration notes.
6.5.1 Example for Performing File Operations by Means of the File
System
This section describes how to perform file operations by means of the file system. In this
example, you can log in to the router to view and copy directories.
Networking Requirements
You can log in to the router through the Console interface, Telnet, or STelnet to perform file
operations on the router.
The file path in the storage device must be correct. If the user does not specify a target file name,
the source file name is the name of the target file by default.
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
Data Preparation
To complete the configuration, you need the following data:
l
Issue 02 (2011-10-15)
NOTE
If the default interception port is in use, information about the current interception port is not displayed.
Conn
Version
State
Username
Retry
CTOS Cipher
STOC Cipher
CTOS Hmac
STOC Hmac
Kex
Authentication Type
Check the files under a certain directory.
Copy a file to this directory.
Check this directory and view that the file is copied successfully to the specified directory.
Source file name and target file name
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
: VTY 4
: 2.0
: started
: client002
: 1
: aes128-cbc
: aes128-cbc
: hmac-md5
: hmac-md5
: diffie-hellman-group-exchange-sha1
: password
6 Managing File System
105