Enabling The Stelnet Server Function - Huawei AR2200 Series Configuration Manual

Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration
6.
7.
Step 7 (Optional) Configuring the Basic Authentication Information for SSH Users
1.
2.
3.
----End

5.4.5 Enabling the STelnet Server Function

To allow users to log in to the router by using STelnet, you must enable the STelnet server
function on the router.
Context
By default, no router is enabled with the STelnet server function. Users can establish connections
to the router by using STelnet only after the router is enabled with the STelnet server function.
Do as follows on the router that serves as an SSH server:
Procedure
Step 1 Run:
system-view
Issue 02 (2011-10-15)
Quit the public key editing view.
l If the specified hex-data is invalid, the public key cannot be generated after the peer-
public-key end command is run.
l If the specified key-name is deleted in other views, the system prompts that the key does
not exist after the peer-public-key end command is run and the system view is
displayed.
Run:
peer-public-key end
Return to the system view from the public key view.
Run:
ssh user user-name assign rsa-key key-name
The public key is assigned to the SSH user.
Run:
ssh server rekey-interval interval
The interval for updating the server key pair is configured.
By default, the interval for updating the key pair of the SSH server is 0 that indicates no
updating.
Run:
ssh server auth-timeout timeout_interval
The timeout period of the SSH authentication is set.
By default, the timeout period is 60 seconds.
Run:
ssh server authentication-retries auth-times
The number of retry times of the SSH authentication is set.
By default, the retry times is 3.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Configuring User Login
69