Checking The Configuration; Configuration Examples; Example For Configuring Telnet Services - Huawei AR2200 Series Configuration Manual

Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration

8.7.7 Checking the Configuration

After logging in to another device by using SFTP, you can view the source address of the SSH
client, the mappings between all SSH servers and the RSA public keys on the client, the global
configurations of the SSH servers, and the sessions between the SSH servers and the client.
Prerequisite
The configuration of accessing files on another device by using SFTP is complete.
Procedure
l
----End
Example
Run the display sftp-client command on the client to view the source parameters of the device
functioning as an SFTP client.
<Huawei> display sftp-client
Info: The source address of SFTP client is 1.1.1.1

8.8 Configuration Examples

This section describes examples for access another device. The examples explain networking
requirements, configuration notes, and configuration roadmap.

8.8.1 Example for Configuring Telnet Services

In this example, the authentication mode and password are configured for users to log in using
Telnet.
Networking Requirements
As shown in
in to Router B from Router A using Telnet.
Figure 8-8 Networking diagram for configuring Telnet services
RouterA
Configuration Roadmap
The configuration roadmap is as follows:
Issue 02 (2011-10-15)
Run the display sftp-client command to check the source IP address of the SFTP client on
the SSH client.
Figure 8-8, Router A and Router B can ping each other successfully. A user logs
GE1/0/0
1.1.1.1/24 1.1.1.2/24
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
GE1/0/0
RouterB
8 Accessing Another Device
152