Huawei AR2200 Series Configuration Manual page 165

Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration
>>User password:
Huawei Integrated Access SoftwareAR.
Copyright(C) Huawei Technologies Co., Ltd. 2010-2011. All rights reserved.
<RouterB>
Step 4 Configure a Telnet server port number on Router B.
<RouterB> system-view
[RouterB]sysman service telnet port 1028
After the command is executed, logging in to the port through telnet fails, al
l the telnet users exit, and a new port is created. If you need to set the port
through telnet again, wait for at least two minutes and then set the port again.
Are you sure to continue?(y/n)[n]: y
Step 5 Use the port number 1028 to log in to Router B from Router A using Telnet.
<RouterA> telnet 1.1.1.2 1028
Press CTRL_] to quit telnet mode
Trying 1.1.1.2 ...
Connected to 1.1.1.2 ...
User Access Verification
>>User password:
Huawei Integrated Access SoftwareAR.
Copyright(C) Huawei Technologies Co., Ltd. 2010-2011. All rights reserved.
<RouterB>
----End
Configuration Files
l
l
Issue 02 (2011-10-15)
Configuration file of Router A
#
sysname RouterA
#
interface GigabitEthernet1/0/0
ip address 1.1.1.1 255.255.255.0
#
return
Configuration file of Router B
#
sysname RouterB
#
acl number 2000
rule 5 permit source 1.1.1.1 0
#
interface GigabitEthernet1/0/0
ip address 1.1.1.2 255.255.255.0
#
user-interface con 0
user-interface vty 0 4
acl 2000 inbound
set authentication password simple hello
#
return
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Accessing Another Device
154