Locking User Interfaces; Sending Messages To Other User Interfaces - Huawei AR2200 Series Configuration Manual

Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration
super [ level ]
User levels are switched.
By default, the level is 3.
Step 5 Follow the prompt and enter a password.
If the password entered is correct, the user can switch to a higher level. If the user enters a
password incorrectly for three consecutive times, the user remains at the current login level and
returns to the user view.
----End

5.5.3 Locking User Interfaces

When you leave the operation terminals for a moment, you can lock the user interface to prevent
unauthorized users from operating the interface.
Context
The user interface can be classified into the Console user interface and VTY user interface.
Procedure
Step 1 Run:
lock
The user interface is locked.
Step 2 Follow the system prompt and input an unlock password, and then confirm the input.
<Huawei> lock
Enter Password:
Confirm Password:
If the locking is successful, the system prompts that the user interface is locked.
You must enter a correct password to unlock the user interface.
----End

5.5.4 Sending Messages to Other User Interfaces

Messages can be exchanged between the current user interface and other user interfaces.
Context
Users logging in to the router can send messages from the current user interface to users in other
user interfaces as needed.
Issue 02 (2011-10-15)
NOTE
When the login user of lower level is switched to the user of higher level through the super command, the
system automatically sends trap messages and records the switchover in a log. When the switched level
is lower than that of the current level, the system only records the switchover in a log.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Configuring User Login
75