Huawei AR2200 Series Configuration Manual page 88

Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration
Configuration Roadmap
1.
2.
3.
Data Preparation
Communication parameters of the PC (baud rate: 4800 bps, data bit: 6, parity: even, stop bit: 2,
flow control mode: none)
Procedure
Step 1 Establish the configuration environment by connecting the serial port of the PC to the console
port of the router through standard RS-232 cable.
Step 2 Start a terminal emulator on the PC, and set the communication parameters of the PC, as shown
in Figure 5-2
Figure 5-2 Connection creation
Issue 02 (2011-10-15)
Connect a PC to the router through a console port.
Perform login settings on the PC.
Log in to the router.
NOTE
In this example, a terminal emulator is used.
to Figure 5-4.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Configuring User Login
77