Example For Configuring System Startup - Huawei AR2200 Series Configuration Manual

Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration

7.4.1 Example for Configuring System Startup

This section provides an example for configuring system startup. In this example, the
configuration file is saved and the system software and configuration file to be loaded during
the next startup are specified so that the router can start in a required manner.
Networking Requirements
After the router is configured, new configurations take effect after the system restarts.
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
Data Preparation
To complete the configuration, you need the following data:
l
l
Procedure
Step 1 Check the configuration file and system software that are used during the current startup.
<Huawei> display startup
MainBoard:
Startup system software:
Next startup system software:
Backup system software for next startup:
Startup saved-configuration file:
Next startup saved-configuration file:
Startup license file:
Next startup license file:
Startup patch package:
Next startup patch package:
Startup voice-files:
Next startup voice-files:
Step 2 Save the current configuration to the specified file.
<Huawei> save vrpcfg.cfg
The system prompts you whether to save the current configuration to the file named vrpcfg.cfg
on the main control board. After entering y at the prompt, you save the configuration
successfully.
Step 3 Specify the configuration file to be loaded during the next startup of the router.
<Huawei> startup saved-configuration usb0:/arcfg.cfg
Step 4 Specify the system software to be loaded during the next startup of the router.
Specify the system software to be loaded during the next startup of the main control board.
<Huawei> startup system-software usb0:/arsoft.cc
Issue 02 (2011-10-15)
Save the current configuration.
Specify the configuration file to be loaded during the next startup of the router.
Specify the system software to be loaded during the next startup of the router.
Name of the configuration file
File name of the system software
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Configuring System Startup
usb0:/ar0312.cc
usb0:/ar0312.cc
null
flash:/iascfg.zip
flash:/iascfg.zip
null
null
null
null
null
null
120