Command Line Views - Huawei AR2200 Series Configuration Manual

Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration

2.1.3 Command Line Views

The command line interface has different command views. All the commands are registered in
one or more command views. You can run a command only when you enter the corresponding
command view.
The following part uses the user, system, and aaa views as an example:
# Establish connection to the router. If the router adopts the default configuration, you can enter
the user view with the prompt of <Huawei>.
<Huawei>
# Run the system-view command to enter the system view.
<Huawei> system-view
[Huawei]
# Run the aaa command in the system view to enter the AAA view.
[Huawei] aaa
[Huawei-aaa]
Issue 02 (2011-10-15)
Figure 2-2 Searching commands based on a specific level
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 CLI Overview
10