Checking The Configuration - Huawei AR2200 Series Configuration Manual

Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration
2.
----End

5.3.6 Checking the Configuration

After users log in to the system by using Telnet, you can view the connection status of the current
user interface, connection status of each user interface, and status of all established TCP
connections.
Prerequisite
Configurations of logins by using Telnet are complete.
Procedure
l
l
l
----End
Example
Run the display users command to view information about the currently-used user interface.
<Huawei> display users
User-Intf
34
Username : Unspecified
+ 35
Username : Unspecified
Run the display tcp status command to view TCP connections. In the command output,
Established indicates that a TCP connection has been established.
Issue 02 (2011-10-15)
Press "Enter" to display the command line prompt of the system view, such as
<HUAWEI>. This indicates that you have accessed the Telnet server.
Run the display users [ all ] command to check information about logged-in users on user
interfaces.
Run the display tcp status command to check TCP connections.
Run the display telnet server status command to check the configuration and status of the
Telnet server.
Delay Type
VTY 0 00:00:12 TEL
VTY 1 00:00:00 TEL
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Network Address AuthenStatus
10.138.77.38
10.138.77.57
5 Configuring User Login
AuthorcmdFlag
no
no
64