Optional) Configuring The Stelnet Server Parameters - Huawei AR2200 Series Configuration Manual

Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration
The system view is displayed.
Step 2 Run:
stelnet server enable
The STelnet server function is enabled.
By default, the STelnet server function is disabled.
----End

5.4.6 (Optional) Configuring the STelnet Server Parameters

You can configure a device to be compatible with the SSH protocol of earlier versions, configure
or change the listening port number of an SSH server, set an interval at which the key pair of
the SSH server is updated, and specify the source interface.
Context
Table 5-2
Table 5-2 Server parameters
Server
Parameter
Earlier SSH
version
compatibility
Interval at
which the key
pair of the
SSH server is
updated
Do as follows on the router that serves as an SSH server:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Perform one or more operations shown in
Issue 02 (2011-10-15)
lists server parameters.
Description
SSH has two versions: SSH1.X (earlier than SSH2.0) and SSH2.0. Compared
with SSH1.X, SSH2.0 is extended in structure and supports more
authentication modes and key exchange methods. SSH2.0 also supports more
advanced services such as SFTP. The Huawei AR2200 Series supports SSH
versions ranging from 1.3 to 2.0.
After the interval is set, the key pair of the SSH server is updated periodically
to improve security.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 5-3 as needed.
5 Configuring User Login
70