Further Information; Nameplate And Warning Labels; Nameplate; Warning Labels - Otto Bock VENTUS Instructions For Use Manual

Delivery

3.3 Further information

INFORMATION
Even in the event of compliance with all applicable guidelines and standards, alarm systems (e.g. in department
stores) may respond to your product. Should this happen, remove your product from the area where the alarm
was triggered.

3.4 Nameplate and warning labels

3.4.1 Nameplate

Label
The nameplate is located on the crossbrace.

3.4.2 Warning labels

Label
4 Delivery

4.1 Scope of delivery

The wheelchair is delivered preassembled and with the rear wheels removed packed in a crate.
The scope of delivery includes:
• Preassembled wheelchair
• 2 rear wheels
• Options according to the order
• Instructions for use (user)

4.2 Options

The standard model can be fitted to the user's personal requirements thanks to a large range of options. For use of
these options: see Page 12 ff.
10 | Ottobock
A Type designation
B Manufacturer article number
C Maximum load capacity (see section "Technical Data")
D Manufacturer information, address, country of origin
E Serial number/manufacturing date
F European Article Number/Global Trade Item Number
G Read the instructions for use before using the product.
H The product has not been approved by the manufacturer for use
as a seat in a wheelchair accessible vehicle
I
CE marking – product safety in accordance with EU directives
H Depending on the version of the nameplate: The product has
not been approved by the manufacturer for use as a seat in
vehicles for transporting persons with reduced mobility
(Safety loop on the wheelchair)
Caution!
The rear wheels have been pre-positioned according to your
indications. Before using the wheelchair, this pre-adjusted
position must be checked by the wheelchair user for function
and stability against tipping with the assistance of qualified
personnel.
Meaning
Meaning
Ventus