Adjusting A Channel Forearm Pad With Swivel Unit - Otto Bock VENTUS Instructions For Use Manual

Use

6.6.4 Adjusting a channel forearm pad with swivel unit

INFORMATION
After adjusting the swivel unit, please always make sure that the lock pins have safely snapped in place.
The swivel unit allows the support angle and the rotation setting of a channel forearm pad to be adjusted independ­
ently.
Adjusting the support angle
1) Pull the release button outwards (see fig. 26, item 1).
2) Lift up the channel forearm pad at the front end and adjust it to the desired angle (see fig. 26, item 2).
3) Let go of the release button. The channel forearm pad will be secured in its position.
Adjusting the rotation setting in 15° steps
1) Pull the release button downwards (see fig. 27, item 1).
2) Move the channel forearm pad to the desired rotation setting.
3) Let go of the release button. The channel forearm pad will be secured in its position.
Continuously adjusting the rotation setting
1) Pull the release button downwards (see fig. 27, item 1).
2) Turn the release button 90°. In this position the channel forearm pad can be rotated freely.
3) Move the channel forearm pad to the desired rotation setting.
4) Let go of the release button. The channel forearm pad will be secured in its position.
Adjusting the depth of the channel forearm pad
1) Loosen the Allen head screws under the channel forearm pad (see fig. 27, item 2).
2) Slide the channel forearm pad to the desired depth.
3) Re-tighten the Allen head screws under the channel forearm pad (see fig. 27, item 2).
26
INFORMATION
After adjusting the swivel unit, please always make sure that the lock pins have safely snapped in place.
The swivel unit allows the support angle and the rotation setting of a channel forearm pad to be adjusted independ­
ently.
Adjusting the support angle
1) Pull the release button outwards (see fig. 28, item 1).
2) Lift up the channel forearm pad at the front end and adjust it to the desired angle (see fig. 28, item 2).
3) Let go of the release button. The channel forearm pad will be secured in its position.
Adjusting the rotation setting in 15° steps
1) Pull the release button downwards (see fig. 29, item 1).
2) Move the channel forearm pad to the desired rotation setting (see fig. 29, item 2).
3) Let go of the release button. The channel forearm pad will be secured in its position.
18 | Ottobock
27
Ventus