Cleaning Belts; Disinfection; Maintenance And Repair; Maintenance - Otto Bock VENTUS Instructions For Use Manual

Seat cushion with foam core
1) Open the zipper and remove the foam core (see fig. 56).
2) Clean the cover according to the attached care label.
3) Wash all foam parts by hand at 40°C using a mild, environmentally friendly detergent. Allow to air dry.
4) Reinsert the foam core with proper alignment. Close the zipper.
56

6.19.1.2 Cleaning belts

Cleaning a belt system with metal buckle
INFORMATION
Observe the washing recommendations on the product and the information in the corresponding instructions for
use provided for the product.
Belts with metal snaps may not be washed in washing machines as the penetration of water could cause
•
corrosion and subsequent malfunctions.
• Clean the belt straps by gently dabbing them with warm soapy water (with some disinfectant) or carefully wiped
with a dry, clean, absorbent cloth.
Cleaning a belt system with plastic buckle
• Belts with snaps of synthetic material – depending on the model – are machine washable between 40 °C and
60 °C.
• Recommendation: Use a laundry bag or net and mild detergent.
INFORMATION
Alternatively, the belt straps can be cleaned by being gently dabbed with warm soapy water (with some disinfect­
ant) or carefully wiped with a dry, clean, absorbent cloth.
Additional cleaning instructions
• Allow the belts to air dry. Ensure that the belts and pads are completely dry before installation.
• Do not expose the belts to direct heat (e.g. sunshine, stove or radiator).
• Do not iron or bleach the belts.

6.19.2 Disinfection

1) Thoroughly clean the pads and handles before disinfecting.
2) Wipe all parts of the wheelchair with a disinfectant.
Important information about disinfecting
• If the product is used by more than one person, using a conventional disinfectant is required.
• Only use colourless water-based disinfectants. Observe the instructions for use provided by the manufacturer.

7 Maintenance and repair

7.1 Maintenance

• The function of the product should be checked before each use.
Ventus
Maintenance and repair
Ottobock | 29