Beep On Ascii Bel; Beep On Not On File - Datalogic Cobalto C05300 Product Reference Manual

Enter/Exit Programming Mode

Beep On ASCII BEL

When this parameter is enabled, the scanner issues a beep when a <BEL> character is
detected on the RS-232 serial line. <BEL> is issued to gain a user' s attention to an illegal entry
or other important event.
$CR2BB00
Beep On ASCII BEL = Disable

Beep On Not on File

This option enables/disables the action of the scanner to sound a three beep sequence upon
receiving a Not-On-File (NOF) host command.
$CBPNF00
Beep On Not On File = Disable
DEFAULT
24


Beep On ASCII BEL
DEFAULT
$CR2BB01 
Beep On ASCII BEL = Enable
$CBPNF01 
Beep On Not On File = Enable
Cobalto™ CO5300 Scanner