I 2 Of 5 Set Length 2; I 2 Of 5 Zero Pattern - Datalogic Cobalto C05300 Product Reference Manual

Enter/Exit Programming Mode

I 2 of 5 Set Length 2

This feature specifies one of the bar code lengths for
maximum label length if in
Length
The length can be set from 2 to 50 characters. A setting of 0 specifies to ignore this length
(only one fixed length). See
instructions.
Select I 2 of 5 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.

I 2 of 5 Zero Pattern

Enables/disables ZERO-Digit decoding. This character does not represent any cipher. It allows
encoding of an odd number of ciphers with Interleaved 2 of 5. It must be enabled to decode
Code 2 of 5 CIP/HR.
DEFAULT
$CI2ZP01
I 2 of 5 Zero Pattern = Enable
138
Variable Length
Mode. The length includes the bar code's check and data characters.
"Set Length 2"
$CI2L2
DEFAULT

I 2 of 5 Length Control
Mode, or the second fixed length if in
on page 241 for more detailed programming
To configure this feature, scan the ENTER/EXIT bar
code above, then the bar code at left followed by dig-
its from the Alphanumeric characters in
Keypad
representing your desired character(s). End
by scanning the ENTER/EXIT bar code again.
50 = Length 2 is 50 Characters
I 2 of 5 Zero Pattern = Disable
Interleaved 2 of 5 (I 2 of 5)
. Length 2 is the
Fixed
Appendix D,
~
CANCEL
$CI2ZP00 
Cobalto™ CO5300 Scanner