Datalogic 2 Of 5 Set Length 1 - Datalogic Cobalto C05300 Product Reference Manual

Datalogic 2 of 5

Datalogic 2 of 5 Set Length 1

This feature specifies one of the bar code lengths for
Length 1 is the minimum label length if in
Fixed Length
The length can be set from 2 to 50 characters in increments of two. See
page 239 for more detailed programming instructions.
Select Datalogic 2 of 5 Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
Product Reference Guide
Mode. The length includes the bar code's data characters only.
$CD2L1
DEFAULT
Datalogic 2 of 5 Length Control
Variable Length
To configure this feature, scan the ENTER/EXIT bar
code above, then the bar code at left followed by dig-
its from the Alphanumeric characters in
Keypad
representing your desired character(s). End
by scanning the ENTER/EXIT bar code again.
06 = Length 1 is 6 Characters
Enter/Exit Programming Mode
Mode, or the first fixed length if in
"Set Length 1"
Appendix D,
~
CANCEL
.
on
143