Global Prefix/Suffix - Datalogic Cobalto C05300 Product Reference Manual

Enter/Exit Programming Mode

Global Prefix/Suffix

Up to 20 ASCII characters may be added as a prefix (in a position before the bar code data) and/
or as a suffix (in a position following the bar code data). See
page 229 for more detailed programming instructions.
To configure this feature, scan the ENTER/EXIT bar code above,
then the bar code at left followed by digits from the Alphanu-
Appendix D, Keypad
meric characters in
desired character(s). End by scanning the ENTER/EXIT bar code
again.
Set Global Suffix
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
46
representing your
$CLFSU
DEFAULT
"Global Prefix/Suffix"
Set Global Prefix
To configure this feature, scan the ENTER/EXIT bar code above,
then the bar code at left followed by digits from the Alphanu-
Appendix D, Keypad
meric characters in
desired character(s). End by scanning the ENTER/EXIT bar code
again.
No Global Prefix
Global Suffix = 0x0D(CR)
Global Prefix/Suffix
on
$CLFPR
representing your
~
CANCEL
Cobalto™ CO5300 Scanner