Label Id: Set Individually Per Symbology; Label Id Control - Datalogic Cobalto C05300 Product Reference Manual

Label ID

Label ID: Set Individually Per Symbology

This feature configures a Label ID individually for a single symbology.

Label ID Control

This option controls whether a Label ID is disabled, or sent as a prefix or suffix for a given
symbology type.
DEFAULT
$CIDCO01
Label ID Transmission = Enable as Prefix
Product Reference Guide
This setting requires the scanning of bar codes from multiple sec-
tions. See
page 234 for more detailed programming instructions.
NOTE
~
CANCEL
"Label ID: Set Individually Per Symbology"
Label ID Transmission = Disable
Label ID Transmission = Enable as Suffix
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
Enter/Exit Programming Mode
on
$CIDCO00
$CIDCO02
49