Codabar Set Length 2 - Datalogic Cobalto C05300 Product Reference Manual

Codabar

Codabar Set Length 2

This feature specifies one of the bar code lengths for
the maximum label length if in
Length
length must include at least one data character.
The length can be set from 3 to 50 characters. A setting of 00 specifies to ignore this length
(only one fixed length). See
instructions.
Select Codabar Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
Product Reference Guide
Mode. The length includes the bar code's start, stop, check and data characters. The
"Set Length 2"
$CCBL2
DEFAULT
Codabar Length Control
Variable Length
Mode, or the second fixed length if in
on page 241 for more detailed programming
To configure this feature, scan the ENTER/EXIT bar
code above, then the bar code at left followed by dig-
its from the Alphanumeric characters in
Keypad
representing your desired character(s). End
by scanning the ENTER/EXIT bar code again.
50 = Length 2 is 50 Characters
Enter/Exit Programming Mode
. Length 2 is
Fixed
Appendix D,
~
CANCEL
155