Msi Set Length 1 - Datalogic Cobalto C05300 Product Reference Manual

Enter/Exit Programming Mode

MSI Set Length 1

This feature specifies one of the bar code lengths for
minimum label length if in
Mode. Length includes the bar code's data characters only.
The length can be set from 01 to 50 characters. See
detailed programming instructions.
$CMSL1
Select MSI Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
184
Variable Length
DEFAULT
MSI Length Control
Mode, or the first fixed length if in
"Set Length 1"
To configure this feature, scan the ENTER/EXIT bar
code above, then the bar code at left followed by dig-
its from the Alphanumeric characters in
Keypad
representing your desired character(s). End
by scanning the ENTER/EXIT bar code again.
01 = Length 1 is 1 Character
. Length 1 is the
Fixed Length
on page 239 for more
Appendix D,
~
CANCEL
Cobalto™ CO5300 Scanner
MSI