Timeout: Enter Low Power State - Datalogic Cobalto C05300 Product Reference Manual

Timeout: Enter Low Power State

Timeout: Enter Low Power State
Specifies the Low Power timeout in minutes.
Upon having been inactive for this period of time, the scanner will enter a Low Power state
where it is running at a limited speed, but is still able to decode.
To exit this state, either press the button on the top of the scanner or read a label.
$CSMTO01
Enter Low Power Timeout = 1 Minute
$CSMTO03
Enter Low Power Timeout = 3 Minutes
DEFAULT
Product Reference Guide
When this feature is set as Disabled, the scanner will never enter this state.
NOTE
Touch Button Option
If the feature
will not trigger single line scanning and the
power state and standby state.
NOTE


Enter/Exit Programming Mode
has been set to "Disabled," the button
scanner will never enter low
$CSMTO00 
Enter Low Power Timeout = Disabled
$CSMTO02 
Enter Low Power Timeout = 2 Minutes
$CSMTO05 
Enter Low Power Timeout = 5 Minutes
61