Ack Nak Options - Datalogic Cobalto C05300 Product Reference Manual

ACK NAK Options

ACK NAK Options
This enables/disables the ability of the scanner to support the RS-232 ACK/NAK protocol.
When configured, the scanner and/or host sends an "ACK" when it receives data properly, and
sends "NAK" when the data is in error.
Options are:
•
•
•
•
DEFAULT
$CR2AE01
ACK/NAK Protocol = Enable for label transmission
$CR2AE03
ACK/NAK Protocol = Enable for label transmission and
host-command acknowledge
Product Reference Guide
Disable
Enable for label transmission — The scanner expects an ACK/NAK response from the
host when a label is sent.
Enable for host-command acknowledge — The scanner will respond with ACK/NAK
when the host sends a command.
Enable for label transmission and host-command acknowledge


Enter/Exit Programming Mode
$CR2AE00
ACK/NAK Protocol = Disable ACK/NAK
$CR2AE02
ACK/NAK Protocol = Enable for host-command
acknowledge


25