Audio Jingle Enable - Datalogic Cobalto C05300 Product Reference Manual

Audio Jingle Enable

Enter/Exit Programming Mode
Audio Jingle Enable
1
This option determines whether the scanner will sound predefined "Jingles " or traditional
beep sounds to indicate good read and power-up events.
page 68
See the following two parameters (starting on ) to select which preloaded Jingle to
sound upon power-up or good read events.

$CAUEN00
DEFAULT
Audio Jingle = Disable (Use traditional beep sounds)

$CAUEN01
Audio Jingle = Enable Jingles
1. A "Jingle" is a short, user-defined tune uploaded via Datalogic Aladdin™ configuration software.
67
Product Reference Guide