Good Read Led Duration - Datalogic Cobalto C05300 Product Reference Manual

Good Read Beep Length — continued
$CBPLE14
Good Read Beep Length = 200 msec

Good Read LED Duration

This feature specifies the amount of time that the Good Read LED remains on following a good
read. The good read LED on time can be set within a range of 0.1 to 25.5 seconds in 100ms
increments. See
instructions.
Select Good Read LED Duration Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
NOTE
Product Reference Guide

Good Read LED Duration on page 238
$CLAGL
DEFAULT
Indicators are dimmed during sleep.
Select Audio Jingle for Good Read Event
Good Read Beep Length = 180 msec
To configure this feature, scan the ENTER/EXIT bar
code above, then the bar code at left followed by dig-
its from the Alphanumeric characters in
Keypad
representing your desired character(s). End
by scanning the ENTER/EXIT bar code again.
020 = Good Read LED stays on
for 2 seconds.
$CBPLE12 
for more detailed programming
Appendix D,
~
CANCEL
77