Video In Connectors (Hd15); Connecting A Vga Video Input; Connecting A Composite Video Input; Connecting A Component Video Input - AMX UDM-1604C Operation/Reference Manual

4x16 multi-format distribution hub
Hide thumbs Also See for UDM-1604C:
Table of Contents

Advertisement

UDM Hubs allow you to compensate brightness, sharpness and skew delay via options in the Status page
of the UDM's built-in WebConsole (see the Video Compensation section on page 29).

VIDEO IN Connectors (HD15)

FIG. 13 provides the pin layout for the VIDEO IN HD15 Connectors:
5
10
15
14
FIG. 13
VIDEO IN HD15 Connector

Connecting a VGA Video Input

1. Connect one end of a VGA cable to the source device's VGA output port.
2. Attach the other end of the cable to the appropriate VIDEO IN connection (A or B) on the UDM.
For example, connect to the Video In connection on Input A of the Hub.
3. Connect any audio to the analog (RCA) audio connectors or digital (SPDIF) connector.
Ensure the UDM Hub port the RX01/RX02 is attached to is configured correctly within
the Hub's configuration software. Also ensure the correct Audio Type (Analog L/R, S/
PDIF, or None) is selected for the relevant input. Refer to the Configuration - Inputs
Page section on page 49 for details.

Connecting a Composite Video Input

1. Connect the UDM-HD15RCA3 Breakout Cable (FG-HD15RCA3, not included) to the source
device's Composite output ports:
2. Attach the other end of the cable to the appropriate VIDEO IN connection (A or B) on the UDM.
3. Connect any audio to the analog (RCA) audio connectors or digital (SPDIF) connector.

Connecting a Component Video Input

1. Connect the UDM-HD15RCA3 Breakout Cable (FG-HD15RCA3, not included) to the video source
device's Component video output connectors (Red, Green and Blue).
2. Attach the other end of the cable to the appropriate VIDEO IN connection (A or B) on the UDM.
3. Connect any audio to the analog (RCA) audio connectors or digital (SPDIF) connector.
UDM-1604C 4x16 Multi-Format Distribution Hub
Excessive skew can adversely affect video image quality, especially at long cable lengths and
high signal resolutions.
Input Pin
1
2
3
4
5
6
4
3
2
1
7
8
9
8
7
6
9
13
12
11
10
11
12
13
14
15
A1 = red RCA
A2 = green RCA
A3 = blue RCA
HD15 Pinouts
VGA
Component
S-Video
Red
Pr
Luminance
Green
Y
n/c
Blue
Pb
Chrominance
n/c
n/c
n/c
Ground
n/c
n/c
Red - Ground
Pr - Ground
Luminance - Ground
Green - Ground
Y - Ground
n/c
Blue - Ground
Pb - Ground
Chrominance - Ground
n/c
n/c
n/c
Ground
n/c
n/c
n/c
n/c
n/c
n/c
n/c
n/c
Horz. Synch
n/c
n/c
Vert. Synch
n/c
n/c
n/c
n/c
n/c
Wiring and Connections
Composite
CVBS1
CVBS2
CVBS3
n/c
n/c
CVBS1 - Ground
CVBS2 - Ground
CVBS3 - Ground
n/c
n/c
n/c
n/c
n/c
n/c
n/c
15

Advertisement

Table of Contents
loading

Table of Contents