Powering On The Udm-Rx02; System Overview - AMX UDM-1604C Operation/Reference Manual

Powering on the UDM-RX02

As a Class 1 appliance, ensure the device is connected to a main socket outlet with a
protective grounding connection.
The UDM-RX02 may be powered by its hub device through a standard CAT5 cable, but it may also be
powered through an optional 24 VDC power supply (FG-UDM-PS) intended to augment power for very
long cable runs.
To connect the UDM Receiver to the optional power supply, insert the barrel connector of the power
supply into the power connector on the UDM Receiver (see FIG. 17 on page 20).
To power down the UDM-RX02, remove the barrel connector of the power supply from the power
connector and then remove the Ethernet cable from the UDM Hub connector.
Disconnecting the optional power supply will not power down the UDM-RX02 if its
Ethernet connection to the UDM Hub is intact.

System Overview

FIG. 18 provides a basic system diagram representing a UDM Hub, UDM Receiver, and connected
devices:
Video Out
Ethernet
(network
FIG. 18 UDM System Diagram
UDM-1604C 4x16 Multi-Format Distribution Hub
DVD
Audio Out Video Out
Video In Audio In Video In
UDM Hub
UDM Receiver
Audio Out
Video Out
Video In Audio In
Display
Wiring and Connections - UDM Receivers
DSS
Audio Out
Audio In
Ethernet
23