Flexible Numbering/Fixed Numbering - Panasonic KX-TDA30 Features Manual

2.3 System Data Control
2.3.6

Flexible Numbering/Fixed Numbering

Description
To dial another extension user or to access PBX features, the access numbers (extension numbers or
feature numbers) are required.
There are three types of numbering plans:
1) Flexible Numbering (available while a dial tone is heard)
2) Flexible Numbering (available while busy, DND, or ringback tone is heard)
3) Fixed Numbering (available while dialling or talking)
1.
Flexible Numbering (available while a dial tone is heard)
Extension numbers and feature numbers which are available while a dial tone is heard can be
customised for easy use. The numbers must not conflict. It is also possible to use default (Pattern 1 or
Pattern 2) shown in the following table:
a)
Extension Numbers: Extension numbers consist of leading numbers and additional numbers.
Extension numbers (consisting of "0" through "9") can be assigned as follows:
[KX-TDA30/KX-TDA100/KX-TDA200]
• Numbering schemes: 1-32
• Leading number: up to two digits
• Additional number: up to two digits (default: two digits)
[KX-TDA600]
• Numbering schemes: 1-64
• Leading number: up to three digits
• Additional number: up to two digits (default: two digits)
b)
Feature Numbers: A number of up to four digits, consisting of "0" through "9", " ", and "#"
c)
Other PBX Extension Numbers (Other PBX Extension Number [TIE] -1 through 16): A
number of up to three digits, consisting of "0" through "9", " ", and "#"
[Flexible Numbering Table (available while a dial tone is heard)]
Extension Numbering Scheme 1—Leading
Number
Extension Numbering Scheme 2—Leading
Number
Extension Numbering Scheme 3—Leading
Number
368 Feature Guide
Feature
Pattern 1
(with )
KX-TDA30/KX- KX-TDA600
TDA100/KX-
TDA200
1 / 2
2 / 3
3 / 4
Default
Pattern 2
(without
10 / 20 10
11 / 21 11
12 / 22 12
)