Speed Dialling-Personal/System - Panasonic KX-TDA30 Features Manual
Hybrid ip-pbx
Hide thumbs
Also See for KX-TDA30:
- Features manual (472 pages) ,
- Installation manual (428 pages) ,
- User manual (258 pages)
Table of Contents
Advertisement
1.6 Memory Dialling Features
1.6.1.5
Speed Dialling—Personal/System
Description
An extension user can make calls using abbreviated dialling for frequently dialled numbers which are stored
in the PBX extension data, or the PBX system data.
Personal Speed Dialling is also known as Station Speed Dialling.
Conditions
[General]
•
Any number (e.g., telephone number, feature number) can be stored in a speed dialling number. A
name can be assigned to each Personal Speed Dialling number through personal programming, and
System Speed Dialling number.
•
Call Directory—Speed Dialling
Display PT users can make a call by selecting stored names on the display.
[Personal Speed Dialling]
•
Display Lock
An extension user can lock the Personal Speed Dialling number display to prevent the numbers from
being viewed at any extension through personal programming (Display Lock). In this case, the
Incoming/Outgoing Call Log displays and the SVM Log display are also locked, and the voice messages
in the user's message box cannot be played back. An extension personal identification number (PIN) is
required to use this feature. (→ 1.27.1 Extension Personal Identification Number (PIN))
•
When an EMEC or MEC card is installed in the PBX, the number of entries programmable for each
extension is increased.
[System Speed Dialling]
•
TRS/Barring Override by System Speed Dialling
It is possible to override the TRS/Barring using the System Speed Dialling. (→ 1.8.1 Toll Restriction
(TRS)/Call Barring (Barring))
•
System Speed Dialling Display by AUTO DIAL/STORE Button
Pressing the AUTO DIAL/STORE button on a display DPT while on-hook can display the System Speed
Dialling Directory.
•
When an EMEC or MEC card is installed in the PBX, System Speed Dialling numbers can be assigned
separately for each tenant, depending on the PBX used:
–
KX-TDA30: Each tenant can select to use either the original set of common System Speed Dialling
numbers or the additional common set.
–
KX-TDA100/KX-TDA200/KX-TDA600: Each tenant can select to use either the original set of
common System Speed Dialling numbers or the set of System Speed Dialling numbers designated
specifically for that tenant.
Installation Manual References
KX-TDA30
2.5.7 MEC Card
KX-TDA100/KX-TDA200
2.3.2 MEC Card (KX-TDA0105)
KX-TDA600
102
Feature Guide
Advertisement
Table of Contents
