Panasonic KX-TDA30 Features Manual page 24

1.1 Incoming Call Features
• Inter-digit Time
When the Inter-digit time expires, the PBX stops receiving the DID/DDI number and starts to check the
DID/DDI table. (Refer to the [Programming Example of DID/DDI Table] above).
Even if the Inter-digit time does not expire, the PBX stops receiving the DID/DDI number when the
received number is found in the DID/DDI table. The PBX then routes the call to the corresponding
destination. If the received number matches several entries in the table, the call is directed to the
destination of the first matching entry.
[Example] If a call is received in Lunch mode;
Received Number
123-4567
123-456
PT Programming Manual References
[421] BRI DIL/DDI/MSN Selection
[451] DID Number
[452] DID Name
[453] DID Destination
Feature Guide References
1.1.1.5 Calling Line Identification (CLI) Distribution
2.2.3 Tenant Service
2.2.4 Time Service
3.1 Capacity of System Resources
24 Feature Guide
Destination
Extn. 100
Extn. 101
Explanation
The PBX finds the match in location 0001 in the table
after receiving "7". So the call is routed to extension 100.
The Inter-digit time expired after receiving "6". The PBX
finds the match in location 0003 in the table. So the call
is routed to extension 101.