1.29 Networking Features
Number to dial to call that extension using a public trunk:
9 (trunk access number) + 012-345-1011
[Quick Dialling Table]
Quick Dialling No.
720
If the call cannot be completed using the VoIP network, and the dialled leading number is found in the Quick
Dialling Table, the call will be automatically rerouted to a trunk and as specified by the corresponding
destination number.
When a call is made using the VoIP network, if the PBX does not receive a reply from the other PBX within
about 4 seconds of making the call, or an error is returned, the call is rerouted to a public trunk as specified.
Conditions
•
Some QSIG services are available. (→ 1.29.4 QSIG Standard Features)
•
System programming selects whether or not calls can be automatically rerouted to public trunks.
•
TRS/Call Barring settings apply to calls rerouted to public trunks.
PT Programming Manual References
None
Feature Guide References
1.29.1 TIE Line Service
308
Feature Guide
Destination No.
9012345