Panasonic KX-TDA30 Features Manual page 354

2.2 System Configuration—Software
Light Pattern
Slow red flashing
Note
Any extension user (except extension users allowed to change the mode) can only check the
current status on the display by pressing the Time Service button.
Conditions
• PT programming can set the Start and/or End time of the following:
– Day-1 (Day Start time)
– Lunch (Lunch Start time)
– Day-2 (Lunch End time)
– Night (Night Start time)
PC programming can also set the following three time periods for break mode per day.
– Break-1 Start
– Break-1 End (Day restart)
– Break-2 Start
– Break-2 End (Day restart)
– Break-3 Start
– Break-3 End (Day restart)
• Time Service Switching Mode (Automatic/Manual) Button
A flexible button can be customised as the Time Service Switching Mode (Automatic/Manual) button.
PT Programming Manual References
[101] Time Service Switching Mode
[102] Time Service Starting Time
[514] Time Service Manual Switching
Feature Guide References
1.8.1 Toll Restriction (TRS)/Call Barring (Barring)
1.19.2 Flexible Buttons
2.2.1 Class of Service (COS)
2.2.3 Tenant Service
3.1 Capacity of System Resources
User Manual References
1.7.10 Checking the Time Service Status
2.1.2 Time Service Mode Control
354 Feature Guide
Status
Holiday mode