1.24 Portable Station (PS) Features
1.24.1 Portable Station (PS) Connection
Description
This PBX supports the connection of a PS (e.g., KX-TCA255, KX-TD7690). It is possible to use the PBX
features using the PS like a PT.
Conditions
[General]
•
The PS registration is required through the system programming. To avoid unexpected registration to
another PBX, the Personal Identification Number (PIN) for the PBX is necessary to register a PS. The
registration can be cancelled.
•
Handover
Even if a PS user moves during a conversation, the PS will automatically switch between cells without
disconnecting the call (Handover).
Handover is available in any of the following cases:
a)
During a conversation with an extension or outside party.
b)
While a call is ringing at the PS.
c)
While the PS is in idle status.
PBX
CS
Interface
However, Handover is not available in any of the following cases:
a)
When the new (Handover) CS is busy.
b)
When there is no CS within range.
c)
While the Live Call Screening (LCS) or Two-way Record is activated (→ 1.23.3 Voice Mail DPT
(Digital) Integration).
d)
While the PS user is paging other extensions (→ 1.14.1 Paging).
e)
During a doorphone call (→ 1.16.1 Doorphone Call).
f)
While the PS user is dialling digits to make a trunk call.
g)
During a conversation with an extension using PC Console or PC Phone, to which the conversation
is being recorded.
h)
While participating as a member of a broadcasting call (→ 1.15.1 Broadcasting).
•
When a caller has dialled the extension number of a PS but the CS is busy, the caller hears a busy tone.
CS
CS
1.24 Portable Station (PS) Features
Handover:
Calls will not be
disconnected.
Feature Guide
247