Panasonic KX-TDA30 Features Manual page 26

1.1 Incoming Call Features
[Programming Example of MSN Table for ISDN BRI Port 1]
A table can be programmed for each ISDN-BRI port. Each BRI port has 10 MSN locations.
Location
01
02
:
10
Note
Tenant number and VPS trunk group number can also be assigned in the MSN table. Tenant number
is used to determine the time mode (day/lunch/break/night) for the corresponding MSN. VPS trunk
group number is used in Voice Mail DPT (Digital) Integration.
→ 1.23.3 Voice Mail DPT (Digital) Integration
Explanation:
If the MSN "123-4567" is received from BRI port 1:
1.
Checks the number in the table.
→ Matches the number in location 01.
2.
Checks the time mode.
In Day mode: CLI is enabled. Route to CLI destination.
In Lunch mode: CLI is disabled. Route to MSN destination, extension 100.
Conditions
• To use this feature, the MSN service must be assigned as the distribution method for a trunk port.
• MSN Modification
It is possible to modify a received MSN to make it shorter, which may be convenient when programming
the MSN table. The modification method (removed number of digits/added number) can be
programmed on a trunk port basis.
[Modification Example]
Removed number of digits: 6
Added number: 10
Received MSN: 87654321
• When using point-to-multipoint configuration with a BRI, do not connect another ISDN terminal device
in parallel with the PBX. As only two channels can be used at one time with the BRI, the other ISDN
terminal device may monopolise both channels.
26 Feature Guide
No. Name
123-
A Company
4567
123-
C Company
2468
: :
: :
CLI
Day Lunch
Enable Disable
Enable Disable
: :
: :
Modified MSN: 876543 21 = 1021
1) Remove the first
6 digits.
Destination
... Day
... 101
... 102
: :
: :
2) Add "10".
Lunch ...
100 ...
100 ...
: :
: :