Panasonic KX-TDA30 Features Manual page 17

*: Enable (default);
: → 1.29.1 TIE Line Service
*1
: → 1.29.3 Virtual Private Network (VPN)
*2
2.
Distribution Method
One of the following methods can be assigned to each trunk port:
Method
Direct In Line (DIL)
Direct Inward Dialling (DID)
Multiple Subscriber Number
(MSN) Ringing Service
3.
Destination Change with the Caller's Identification Number
The Calling Line Identification (CLI) Distribution feature works in conjunction with the DIL/DID/DDI/MSN
features.
Feature
Calling Line Identification
(CLI) Distribution
4.
Available Distribution Feature for Each Optional Trunk Card Type
Trunk Card Type
ELCOT/LCOT
DID
T1
: Enable
Directs a call to a preprogrammed single destination (e.g., the
operator).
→ 1.1.1.2 Direct In Line (DIL)
Directs a call with a DID number from a DID line to a preprogrammed
destination.
DID is also known as Direct Dialling In (DDI).
→ 1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
Directs a call with an MSN from an ISDN line to a preprogrammed
destination.
→ 1.1.1.4 Multiple Subscriber Number (MSN) Ringing Service
Directs a call to a CLI destination if the caller's identification number
has been assigned in the Caller ID Table.
→ 1.1.1.5 Calling Line Identification (CLI) Distribution
Channel Type
—
—
LCOT
GCOT
DID
TIE (E & M)
Description & Reference
Description & Reference
Feature
DIL DID/DDI
*
*
*
*
1.1 Incoming Call Features
MSN
*
*
Feature Guide 17